SMOK IPX 80 Pod Mod Kit [CRC]

Description

SMOK IPX 80 Pod Kit – 80W Waterproof Pod Mod

The SMOK IPX 80 is an 80-watt refillable pod mod that pairs the power of a box mod with the convenience of a pod system. It carries an IPX67 rating for waterproof, dustproof and shockproof protection, has adjustable airflow, and runs on a 3000 mAh battery with up to 80W output in variable-wattage mode. It charges via USB Type-C at up to 1.4A, uses a 5.5 mL side-fill pod, and works with SMOK RPM 2 mesh and DC coils for both direct-to-lung and mouth-to-lung vaping. Built-in overcharge and short-circuit protection round out the safety features.

Features:

  • IPX67 waterproof, dustproof, and shockproof certification
  • Adjustable power up to 80W
  • 3000 mAh battery
  • USB Type-C charging, 1.4A
  • Adjustable airflow control
  • 5.5 mL e-liquid capacity
  • Side-fill system
  • RPM 2 mesh and DC coil compatible

Includes:

  • 1x IPX 80 device (3000 mAh)
  • 1x IPX 80 RPM 2 pod (5.5 mL) [CRC]
  • 1x RPM 2 mesh 0.16 ohm coil
  • 1x RPM 2 DC 0.6 ohm MTL coil
  • 1x USB Type-C cable
  • 1x User manual

Coils & replacement pods

The IPX 80 runs on the SMOK RPM 2 coil platform. The kit ships with a 0.16 ohm RPM 2 mesh coil (best for direct-to-lung, higher-wattage vaping) and a 0.6 ohm RPM 2 DC coil (best for mouth-to-lung). Find RPM 2 replacement coils and pods in our vape coils and replacement pods collection, and browse more devices and hardware.

SMOK IPX 80 FAQ

What coils does the SMOK IPX 80 use?
It uses the SMOK RPM 2 coil series. The kit includes a 0.16 ohm RPM 2 mesh coil for direct-to-lung vaping and a 0.6 ohm RPM 2 DC coil for mouth-to-lung.

How do you fill the IPX 80 pod?
The 5.5 mL pod uses a side-fill system – open the fill port on the side of the pod and add your e-liquid. Let a fresh coil sit for a few minutes before vaping to avoid dry hits.

Is the SMOK IPX 80 waterproof?
Yes. It is IPX67 rated, so it is protected against dust and can withstand brief water immersion, and it is shockproof as well.

What is the battery and wattage?
The IPX 80 has a built-in 3000 mAh battery and outputs up to 80W in variable-wattage mode. It recharges over USB Type-C at up to 1.4A.

Is the IPX 80 for MTL or DTL vaping?
Both. Pair the 0.6 ohm DC coil with tighter airflow for mouth-to-lung, or the 0.16 ohm mesh coil with open airflow for direct-to-lung.

Product form

SMOK IPX 80 Pod Kit – 80W Waterproof Pod Mod The SMOK IPX 80 is an 80-watt refillable pod mod... Read more

$54.95

    Description

    SMOK IPX 80 Pod Kit – 80W Waterproof Pod Mod

    The SMOK IPX 80 is an 80-watt refillable pod mod that pairs the power of a box mod with the convenience of a pod system. It carries an IPX67 rating for waterproof, dustproof and shockproof protection, has adjustable airflow, and runs on a 3000 mAh battery with up to 80W output in variable-wattage mode. It charges via USB Type-C at up to 1.4A, uses a 5.5 mL side-fill pod, and works with SMOK RPM 2 mesh and DC coils for both direct-to-lung and mouth-to-lung vaping. Built-in overcharge and short-circuit protection round out the safety features.

    Features:

    • IPX67 waterproof, dustproof, and shockproof certification
    • Adjustable power up to 80W
    • 3000 mAh battery
    • USB Type-C charging, 1.4A
    • Adjustable airflow control
    • 5.5 mL e-liquid capacity
    • Side-fill system
    • RPM 2 mesh and DC coil compatible

    Includes:

    • 1x IPX 80 device (3000 mAh)
    • 1x IPX 80 RPM 2 pod (5.5 mL) [CRC]
    • 1x RPM 2 mesh 0.16 ohm coil
    • 1x RPM 2 DC 0.6 ohm MTL coil
    • 1x USB Type-C cable
    • 1x User manual

    Coils & replacement pods

    The IPX 80 runs on the SMOK RPM 2 coil platform. The kit ships with a 0.16 ohm RPM 2 mesh coil (best for direct-to-lung, higher-wattage vaping) and a 0.6 ohm RPM 2 DC coil (best for mouth-to-lung). Find RPM 2 replacement coils and pods in our vape coils and replacement pods collection, and browse more devices and hardware.

    SMOK IPX 80 FAQ

    What coils does the SMOK IPX 80 use?
    It uses the SMOK RPM 2 coil series. The kit includes a 0.16 ohm RPM 2 mesh coil for direct-to-lung vaping and a 0.6 ohm RPM 2 DC coil for mouth-to-lung.

    How do you fill the IPX 80 pod?
    The 5.5 mL pod uses a side-fill system – open the fill port on the side of the pod and add your e-liquid. Let a fresh coil sit for a few minutes before vaping to avoid dry hits.

    Is the SMOK IPX 80 waterproof?
    Yes. It is IPX67 rated, so it is protected against dust and can withstand brief water immersion, and it is shockproof as well.

    What is the battery and wattage?
    The IPX 80 has a built-in 3000 mAh battery and outputs up to 80W in variable-wattage mode. It recharges over USB Type-C at up to 1.4A.

    Is the IPX 80 for MTL or DTL vaping?
    Both. Pair the 0.6 ohm DC coil with tighter airflow for mouth-to-lung, or the 0.16 ohm mesh coil with open airflow for direct-to-lung.

    Recently viewed products

      Login

      Forgot your password?

      Don't have an account yet?
      Create account