VOOPOO Drag H40 Pro 40W Pod Kit

Description

VOOPOO Drag H40 Pro 40W Pod Kit

The VOOPOO Drag H40 Pro brings the Drag look - zinc alloy frame, leather-wrapped panel, stainless accents - down to a pocketable 116.5mm pod kit. A 2450mAh battery drives up to 40W, and a 0.72-inch TFT screen puts wattage, resistance and battery level in front of you instead of hiding them behind a light. It runs the PnP X platform, so the 5mL side-fill cartridge takes the full PnP X coil range, and airflow is adjustable at the base. Six safety protections and Type-C fast charging (5V/2A) round it out.

VOOPOO Drag H40 Pro 40W Pod Kit features:

  • Output power: 5-40W
  • Battery: built-in 2450 mAh, Type-C charging (5V/2A)
  • Pod capacity: 5 mL, side-fill, child-resistant
  • 0.72-inch TFT display
  • PnP X platform - takes the full PnP X coil range
  • Adjustable airflow
  • Six safety protections
  • Dimensions: 116.5 x 27.5 mm
  • Materials: zinc alloy, leather, PCTG and stainless steel

Available Colours:

  • Spray Black
  • Gray Metal
  • Modern Red
  • Lake Blue
  • Glow Pink
  • Moss Green

Includes:

  • 1x VOOPOO Drag H40 Pro device
  • 1x VOOPOO PnP X empty replacement pod - 5 mL (DLT)
  • 1x VOOPOO PnP X replacement coil - 0.3 ohm
  • 1x VOOPOO PnP X replacement coil - 0.45 ohm
  • 1x PnP X platform card
  • 1x Type-C cable
  • 1x user manual

Drag H40 Pro FAQ

Which coils and pods does it take?

The PnP X range - the same pods and coils used by the Drag S3, Drag X3 and Argus G-series. Two coils are in the box (0.3 ohm and 0.45 ohm); spares are in PnP compatible pods.

How does it compare to the Drag S3?

The H40 Pro is the smaller, simpler one - 40W against the S3's 60W and a lighter frame, but the same PnP X pod platform and the same screen-driven controls. Pick the S3 if you want the extra headroom, the H40 Pro if you want the Drag build in something that disappears into a pocket.

What e-liquid should I use?

At 0.3 and 0.45 ohm it is built for freebase vape juice at lower nicotine strengths and a warmer, more open draw. Higher-resistance PnP X coils tighten it up for salt nic.

How does it charge?

USB Type-C at 5V/2A.

Product form

VOOPOO Drag H40 Pro 40W Pod Kit The VOOPOO Drag H40 Pro brings the Drag look - zinc alloy frame,... Read more

$51.95

    Description

    VOOPOO Drag H40 Pro 40W Pod Kit

    The VOOPOO Drag H40 Pro brings the Drag look - zinc alloy frame, leather-wrapped panel, stainless accents - down to a pocketable 116.5mm pod kit. A 2450mAh battery drives up to 40W, and a 0.72-inch TFT screen puts wattage, resistance and battery level in front of you instead of hiding them behind a light. It runs the PnP X platform, so the 5mL side-fill cartridge takes the full PnP X coil range, and airflow is adjustable at the base. Six safety protections and Type-C fast charging (5V/2A) round it out.

    VOOPOO Drag H40 Pro 40W Pod Kit features:

    • Output power: 5-40W
    • Battery: built-in 2450 mAh, Type-C charging (5V/2A)
    • Pod capacity: 5 mL, side-fill, child-resistant
    • 0.72-inch TFT display
    • PnP X platform - takes the full PnP X coil range
    • Adjustable airflow
    • Six safety protections
    • Dimensions: 116.5 x 27.5 mm
    • Materials: zinc alloy, leather, PCTG and stainless steel

    Available Colours:

    • Spray Black
    • Gray Metal
    • Modern Red
    • Lake Blue
    • Glow Pink
    • Moss Green

    Includes:

    • 1x VOOPOO Drag H40 Pro device
    • 1x VOOPOO PnP X empty replacement pod - 5 mL (DLT)
    • 1x VOOPOO PnP X replacement coil - 0.3 ohm
    • 1x VOOPOO PnP X replacement coil - 0.45 ohm
    • 1x PnP X platform card
    • 1x Type-C cable
    • 1x user manual

    Drag H40 Pro FAQ

    Which coils and pods does it take?

    The PnP X range - the same pods and coils used by the Drag S3, Drag X3 and Argus G-series. Two coils are in the box (0.3 ohm and 0.45 ohm); spares are in PnP compatible pods.

    How does it compare to the Drag S3?

    The H40 Pro is the smaller, simpler one - 40W against the S3's 60W and a lighter frame, but the same PnP X pod platform and the same screen-driven controls. Pick the S3 if you want the extra headroom, the H40 Pro if you want the Drag build in something that disappears into a pocket.

    What e-liquid should I use?

    At 0.3 and 0.45 ohm it is built for freebase vape juice at lower nicotine strengths and a warmer, more open draw. Higher-resistance PnP X coils tighten it up for salt nic.

    How does it charge?

    USB Type-C at 5V/2A.

    Recently viewed products

      Login

      Forgot your password?

      Don't have an account yet?
      Create account